Demolition and Recycling Attachments For Sale

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

to fit 12 - 28 ton excavators

Chassis sn: JW81S1070

Chassis sn: CH1552502054

Chassis sn: HF15502410101

Chassis sn: CH11552502055

To Fit 15-24 t Excavator • Hydraulic Flow Range 90-120 L/min •1300 kg

To Fit 8-12 t Excavator • Open/Close Operating Pressure: 250-280 bar • Open/Close Oil Flow Rate: 50-70 l/min • Weight 596kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 20-25 tons. Max Opening: 31 in. Max Crushing Force: 80 tons. Weight: 3347 lb. Equipped with Swiss imported motor with rotation and imported HALLITE oil seal. Blades are both replaceable and reversible. With Swedish Hardox 500 steel • lightweight and wear-resistant; The pin is made of 42CrMo alloy steel with high strength and toughness;

to fit 17 - 30 ton excavators

80 mm Diameter Pins • 440 mm Center of Pin Boss to Center of Pin Boss • 310 mm Inside to Inside Pin Boss Spacing

70 mm Diameter Pins • 460 mm Center of Pin Boss to Center of Pin Boss • 275 mm Inside to Inside Pin Boss Spacing

to fit 15-24 ton excavator • hydraulic flow range 90-120 L/min •Copy of declaration of conformity available • 1300 kg

Product images displayed are stock photos. Item is new/unused.

to fit 10 - 30 ton excavators

to fit 12 - 35 ton excavators

to fit 15 - 32 ton excavators

to fit CAT315 •for 10-18 ton excavator • two hoses

to fit 5 •5 - 12.5 ton excavators

to fit 1.5 - 5.5 ton excavators

to fit 5 •5 - 12.5 ton excavators

to fit 1.5 - 5.5 ton excavators

to fit 5.5 - 13.5 ton excavators

to fit 17 - 30 ton excavators

to fit 3 •5 - 9.5 ton excavators

80 mm Diameter Pins • 485 mm Center of Pin Boss to Center of Pin Boss • 310 mm Inside to Inside Pin Boss Spacing

65 mm Diameter Pins • 405 mm Center of Pin Boss to Center of Pin Boss • 220 mm Inside to Inside Pin Boss Spacing

to fit 10 - 24 ton excavators

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

to fit 5 - 13 ton excavators

to fit 4 - 12 ton excavators

to fit 15 - 35 ton excavators

to fit 4 - 12 ton excavators

Fits Komatsu • Hitachi • CAT • Volvo • Daewoo • John Deere 20-30 Ton Excavators

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shells lengthened to enhance its firmness