37 Photos
Prince george, BC, CAN
465,239 km (289,087 mi)
2FZXMJCB7XAB08416
A qualified Ritchie Bros. employee collected detailed equipment information and performed functional tests on the key components of this asset. You, or a proxy, may also inspect any items on site prior to bidding on auction day.
ID number
#13367277
In yard
Yes
Year
1999
Manufacturer
Model
Asset type
Serial number or VIN
2FZXMJCB7XAB08416
Features
Cat 3126 6 Cylinder 7.2 L Diesel Engine, 17838 Engine hrs, Eaton Fuller Manual Transmission, 14600 lb Front Axle, 40000 lb Rears, 54600 lb GVWR, 385/65R22.5 Front Tires, 11R22.5 Rear Tires, Hendrickson Air Ride Suspension, 195 in Wheelbase, 101 in Cab to Axle, 178 in Cab to End of Frame
Notes
BUYER RESPONSIBLE FOR LOADOUT , TOW TRUCK REQUIRED , RB STAFF ONSITE TO ASSIST
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
2FZXMJCB7XAB08416
Hour Meter / Odometer
465239 km-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Limited Function Check
The engine could not be started.
Limited Function Check
The drivetrain could not be operationally checked.
Brakes
The brakes could not be operationally checked.
Engine Hours
17838 Engine hrs
Deficiencies
Deficient Components/Systems Include but are not limited to: inoperable, missing wheel and tire
Items must be paid in full by Thursday, 12 June 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.