



107 Photos
Located
Whitefish, ON, CAN
Whitefish, ON, CAN
Usage
2,751 hrs
2,751 hrs
Serial number
15105090
15105090
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#13518128
In yard
No
Features
Enclosed Cab, Cummins 6 Cylinder 260 hp 8.3 L Diesel Engine, 60 ft Sheave Height, 14000 lb Capacity, Rear Mounted, 26 in Auger, Turret Mounted Winch, 16 ft 5 in Body, A-Outriggers, Bumper Mounted Winch, 40 in Rubber Tracks






















Featured Photo
Serial Number / VIN
15105090
Hour Meter / Odometer
2751 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational

Travel Alarm
Inoperable
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual








Seats/Armrests
Steering Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Inoperable
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.










A/C Compressor
Compressor will not engage
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.



Transmission
Operational
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.









Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Limited Function Check
The hydraulic system was operational.










































Bed Body
Support Frame
Hinge Points
Valves
Hoses (Hydraulic)
Swing Motor
Boom Lift Cylinder(s)
Boom Extension Cylinder
Stabilizer Cylinders
Boom Wear Guides
Boom Condition
Turntable Bearing
Stabilizer Beams
Stabilizer Controls
Control Console
Hydraulic Controls
Safety Lock Out/Stop
Operational
Gauges
Operational
Limited Function Check
The hydraulic system was operational.












Left Roller Frame
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Rollers
Right Idler
Right Sprocket
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Jun 25, 2025 | Jun 25, 2025 |
| Silicon | 2.56 PPM | 0.56 PPM |
| Tin | 1.19 PPM | 0.3 PPM |
| Silver | 0.32 PPM | 0.02 PPM |
| Aluminum | 0.5 PPM | 0.07 PPM |
| Chromium | 0.04 PPM | 0.2 PPM |
| Lead | 0 PPM | 0.35 PPM |
| Copper | 4.05 PPM | 57.75 PPM |
| Nickel | 0.32 PPM | 0.2 PPM |
| Iron | 3.36 PPM | 3.8 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Items must be paid in full by Tuesday, 8 January 2030. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.